Friday 24 June 2011

Open a Western Digital Passport Portable 250GB


Western Digital 250GB Passport portable hard drive allows you to add a large amount of storage to almost any computer within minutes. Despite the high marks and very reliable in general, and the hard drive in case the passport system uses a rotating dish. Like any mechanical system, do not fail passport holders at the end of the day at some point, and how it is being how tips to tell you these points

Q 1
Shut down the computer that you are connected to the Western Digital Passport drive. Unplug the USB cable from the external drive and the computer.
Q 2
Close the cover of the slide that protects the input ports on the disk if it has such a passport cover - and not just to do.
Q 3
Hold a passport so you can view side of the drive that contains the connection port USB. Insert the tip of a flathead screwdriver in the small curved incision on the side of the engine - and the other side is relatively flat.
Q 4
Insert a screwdriver in the slot firmly, but gently. Turn slowly half-turn of a screwdriver in a clockwise direction, or to the right. The interior of the casing separates slightly from the outer shell.
Q 5
Turn the passport all over so that you view the other side of the drive. Insert a screwdriver tip in a small incision - again, next to the curved edge - turn a screwdriver and twist in a clockwise direction and a half.
Q 6
Slide the inner part of the outer casing of the box.
Q 7
Disconnect cable connector from the hard disk that leads to the circuit board. Remove the screws that guarantee the preservation of the drive to the inside of the box with the Phillips screwdriver.
Q 8
Replace the internal drive with a new one. Reassemble passport holders by reversing the steps used to disassemble it.

How to Photos on a Home Printer

Printing passport photos on a home printer is easy.
If you have a digital camera and a decent printer, then you'll never have to leave home for passport photos again. Using a quick and super simple web application, printing passport photos is a cinch and free.now how tips tell you about that
Difficulty:
Easy

Instructions

Things You'll Need

  • Digital camera
  • Photo quality printer
  • Photo paper
    • 1
First, take a digital photo of yourself. Stand in front of a white background and pose with a natural expression, closed mouth (no smiling) and open eyes. Be sure and capture your head completely in front of the white background.
    • 2
Log on to epassportphoto.com and select the passport country of origin.
    • 3
Compare photo with "composition checklist" to be sure photo is usable. Then, browse for the photo and upload.
    • 4
From that point, you can crop, download and print your valid passport photos right to your home printer. It's that easy and saves you a trip to the photo shop where you'd pay to have the same thing done.

How to Print a Passport Photo From a Computer


Passport photos aren't just for passports anymore. Background checks, employment inquiries and publicity ventures can all require photos, and a passport photo is an excellent candidate for the job. Though you can go out and pay to have a passport photo taken, the process is easy to do at home if you have the right equipment. Before beginning this process, test the quality of your home printer with a random photo image. If the print job isn't photo quality, you may need to use a work printer or a friend's now how tips tell you about that.

Instructions

Things You'll Need

  • Digital camera
  • Wall with blank space
  • Computer with photo editing software
  • Color photo printer
    • 1
Stand the subject in front of a blank, white or off-white wall. Take three to five digital photographs of the full face and tops of the shoulders. Eyes should be open and mouth closed, and your subject may not wear a hat or sunglasses (regular glasses are okay). Be sure to line up straight on the subject, as if you were trying to include both ears in the photograph.
    • 2
Transfer the image files to your computer as per the instructions for your camera.
    • 3
Open the files in your photo editing software.
    • 4
Choose the clearest photo out of the images taken.
    • 5
Edit the photo to meet passport standards. For the United States, passport photos must be 2 inches by 2 inches, clear with good lighting. The depth of the head must measure 1 inch, and there must be at least 1 1/8 inch depth from the eyes to the bottom of the photo.
    • 6
Load your printer with photo paper. This may require you to change print settings with your printer or computer. Check your manual to confirm these details.
    • 7
Print your passport photos, several to one page. Cut them out and attach them to your application as instructed.